|
|
20. Plain
Paper copier rollers or upper hot rollers or fuser rollers
|
21. Damaged
glass lined spindles and valves
|
 |
 |
Where
used: In plain paper copying machines, Laser Printers
Advantages: For better quality copy, Toner particle
will not get stuck to the rollers hence better, clear copy
quality.
System Used: Teflon PFA or PTFE systems 40 to 60
microns (.04 to .06mm)
Customers: Ricoh, HCL, Kores, Canon and all other PPC
manufacturers |
Where
used: In chemical process industries to regulate the flow
of the material at the bottom of the reaction vessel
Advantages: By removing damaged glass lining and then
coating with Teflon, chipping of glass is eliminated. Teflon
is more resilient than glass hence seat is in firm position.
System used: Teflon Tefzel/PFA hard coat 700 to
1000microns (.7 to 1.0mm)
Customers: Lupin Labs, Zandu chemicals and all chemical
process industries. |
|
22. Stirrers
(SS, MS, Aluminum)
|
|
|
Where
used: Chemical process industries, Pharmaceutical
industries, and food industries for stirring tacky/sticky
material, corrosive material.
Advantages: Easier movement of the stirrer, Less load
on the shaft and blades of the stirrer, if the material is
sticky/tacky, better homogenized mixing of the ingredients,
Lower heat generation due to frictionless surface, no
contamination in to the Product from stirrer MOC.
System used: Teflon PTFE, PFA, PVDF, and TEFZEL 100 to
800 microns depending on the usage. (0.1 to 0.8 mm)
Customers: Pharmaceutical industries, Chemical process
industries, and Food industries. |
 |
|
|
|
 |
