8. Atlas
Copco air compressor screws
|
9. Horizontal
or Vertical centrifuge baskets.
|
|
|
Where
used: In non-lube air compressors.
System Used: Teflon S 20 to 30 microns (.02 to .03mm)
Advantages: To avoid use of oil between the rotors and
to protect the rotors from pitting
Customers: Narmada Chematur, Bharuch. |
Where
used: In all pharma and chemical industries for filtration
of corrosive liquids.
Advantages: Ease of removal of material, less
imbalancing, easy of release of material, Combating corrosion,
no need of hammering or pocking into the basket to remove the
material.
System Used: PVDF, Teflon Tefzel, PFA 300 to 800
microns (0.3 to 0.8 mm)
Customers: Lupin Labs, Ankleshwar, Dharamsi Morarji
Chemicals, Roha. |
10. Moulds
for Toy Industries and Nylon Extrusion Industries.
|
11. Filter
Plates with a heating coil
|
|
|
Where
Used: On the moulds of toys of various complicated
configurations, inside of various size pipes to extrude nylon.
Advantages: Ease of removal of each piece from the
mould without any deformation, breakage, close tolerance of
the OD of the extruded nylon rods, no need of silicon oil for
release purposes hence less contamination of the product.
System Used: Teflon PTFE, PFA, and FEP 40 to 100
microns. (.04 to .1mm)
Customers: Nylon Extrusion Industries, Indore.,
Engineered Polymers, Bombay., Vinit Performance, Bombay. |
Where
Used: In acrylic fiber plant
Advantages: Ease of release, better heat transfer, and
ease of cleaning, less maintenance time.
System Used: Teflon PTFE 50 to 60 microns (.05 to
.06mm)
Customers: IPCL, Indian Acrylic.
|
|
|
|
|
|